Search concepts
|
Selected filters
|
- 83,000 - 83,050 out of 86,590 results
Search results
-
Paper
Computational and experimental investigation of wind load on bridge with split decks on single pylon
Lee, S., Park, C. W., Kim, C. H., Kim, Y. M., Lee, H. E., Cho, Y. R. & Cho, J. Y., 2005.Research output: Contribution to conference › Paper › peer-review
-
Construction of a knowledge base for ergonomic design with human models
Jung, E. S. & Kang, D., 2000, p. 711-714. 4 p.Research output: Contribution to conference › Paper › peer-review
-
Consumer networks & home gateway: Introduction
Sakurai, M. & Ko, S. J., 2003. 1 p.Research output: Contribution to conference › Paper › peer-review
-
Continuous room-temperature operation of optically-pumped two dimensional photonic crystal lasers at 1.6 μm
Hwang, J. K., Ryu, H. Y., Song, D. S., Han, I. Y., Park, H. K., Lee, Y. H. & Jang, D. H., 2000, p. 304-305. 2 p.Research output: Contribution to conference › Paper › peer-review
-
Contour Controller Design for Cubic Parallel Machine Tool
Kim, S., Lee, S. H., Hong, D., Choi, W. C. & Song, J. B., 2003, p. 533-540. 8 p.Research output: Contribution to conference › Paper › peer-review
-
Controlling of texture and microstructure during asymmetrical cold rolling and subsequent annealing in aluminum alloys
Huh, M. Y. & Kang, H. G., 2008, p. 359-362. 4 p.Research output: Contribution to conference › Paper › peer-review
-
Controlling self-assembly of gold nanoparticles in block copolymer templates
Kim, B. J., Chiu, J. J., Bang, J., Hawker, C. J., Pine, D. J. & Kramer, E. J., 2005. 1 p.Research output: Contribution to conference › Paper › peer-review
-
Control of bending oscillation of cantilevers via adaptive materials technology
Librescu, L., Meirovitch, L. & Na, S. S., 1996, p. 98-106. 9 p.Research output: Contribution to conference › Paper › peer-review
-
Control of dielectric response of polyanilines: applications to EMI shielding
Joo, J., MacDiarmid, A. G. & Epstein, A. J., 1995, p. 1672-1677. 6 p.Research output: Contribution to conference › Paper › peer-review
-
Control of resistance to enhance the sensitivity of nanocrysatlline tin oxide gas sensitive thick film
Hong, S. J., Moon, D. G., Han, J. I., Chang, S. G. & Huh, M. Y., 2004, p. 689-692. 4 p.Research output: Contribution to conference › Paper › peer-review
-
Control of the dispersion capability of PMMA-coated TiO2 particles for electronic paper application
Son, M. H., Kim, W. K., Kwon, S. H., Ju, B. K. & Han, J. I., 2009.Research output: Contribution to conference › Paper › peer-review
-
Control of wind farm and VSC-HVDC to enhance frequency reserve
Kim, H., Kim, K., Yoo, Y., Ko, B. & Jang, G., 2016.Research output: Contribution to conference › Paper › peer-review
-
Convex version of multivariate adaptive regression splines for optimization
Shih, T. D., Chen, V. C. P. & Kim, S. B., 2006.Research output: Contribution to conference › Paper › peer-review
1 Citation (Scopus) -
Cooperative joint precoding for relay enhanced cellular system: Design and performance evaluation
Kwon, J. W., Park, K. H., Ko, Y. C. & Yang, H. C., 2011, p. 1820-1824. 5 p.Research output: Contribution to conference › Paper › peer-review
-
Coordinating and competing in ecosystems: How organizational forms shape new technology
Kapoor, R. & Lee, J. M., 2010.Research output: Contribution to conference › Paper › peer-review
1 Citation (Scopus) -
Cost-effective parallel processing for remote sensing applications
Kim, H. J. & Kim, H. S., 1996, p. 405-407. 3 p.Research output: Contribution to conference › Paper › peer-review
-
Crack initiation in pipe grade polyethylene
Zhou, W., Choi, B. H. & Chudnovsky, A., 2006, p. 2485-2489. 5 p.Research output: Contribution to conference › Paper › peer-review
1 Citation (Scopus) -
Cross-layer optimization for satellite-terrestrial heterogeneous networks
Choi, J. P. & Joo, C., 2014, p. 276-281. 6 p.Research output: Contribution to conference › Paper › peer-review
2 Citations (Scopus) -
Crowd behavior representation using motion influence matrix for anomaly detection
Lee, D. G., Suk, H. I. & Lee, S. W., 2013, p. 110-114. 5 p.Research output: Contribution to conference › Paper › peer-review
8 Citations (Scopus) -
Current control method using a double band hysteresis
Kim, B. S., Oh, W. H., Shin, E. C., Seo, S. J., Lee, S. B. & Yoo, J. Y., 2004, p. 286-290. 5 p.Research output: Contribution to conference › Paper › peer-review
-
Current control of a PWM inverter using sliding mode control and adaptive parameter estimation
Lee, J. U., Yoo, J. Y. & Park, G. T., 1994, p. 372-377. 6 p.Research output: Contribution to conference › Paper › peer-review
10 Citations (Scopus) -
D0-mixing/CPV and D decays
Won, E., 2011.Research output: Contribution to conference › Paper › peer-review
-
DAQ system for LEPS experiment
Sugaya, Y., Ahn, J. K., Akimune, H., Asano, Y., Chang, W. C., Date, S., Fujiwara, M., Hicks, K., Hotta, T., Imai, K., Ishikawa, T., Iwata, T., Kawai, H., Kim, Z. Y., Kishimoto, Y., Kumagai, N., Makino, S., Matsukoka, N., Matsumura, T., Mibe, T., & 22 others , 2000, p. 12/70-12/73.Research output: Contribution to conference › Paper › peer-review
-
Data allocation considering data availability in distributed database systems
Park, S. J. & Baik, D. K., 1997, p. 708-713. 6 p.Research output: Contribution to conference › Paper › peer-review
-
Data engineering-based approach to systems design and development
Jeong, I. K. & Baik, D. K., 1995, p. 151-158. 8 p.Research output: Contribution to conference › Paper › peer-review
-
Dealing with the Paradox of Quality Estimation
Eo, S., Park, C., Moon, H., Seo, J. & Lim, H., 2021, p. 1-10. 10 p.Research output: Contribution to conference › Paper › peer-review
2 Citations (Scopus) -
Decomposition of applied eccentric load for thin-walled multicell box girder analysis
Kim, S., Park, N. H. & Kang, Y. J., 2006, p. 1019-1026. 8 p.Research output: Contribution to conference › Paper › peer-review
-
DEEP REPULSIVE CLUSTERING OF ORDERED DATA BASED ON ORDER-IDENTITY DECOMPOSITION
Lee, S. H. & Kim, C. S., 2021.Research output: Contribution to conference › Paper › peer-review
-
Design and evaluation of a wind display for virtual reality
Moon, T. & Kim, G. J., 2004, p. 122-128. 7 p.Research output: Contribution to conference › Paper › peer-review
71 Citations (Scopus) -
Design and evaluation of policy-controllable buffer cache
Ahn, C. J., Choi, S. U., Park, M. S. & Choi, J. Y., 1997, p. 764-771. 8 p.Research output: Contribution to conference › Paper › peer-review
1 Citation (Scopus) -
Design and implementation of a high performance management information tree for a TMN platform
Han, D., Cui, W., Park, Y. & An, S., 1999, p. 634-637. 4 p.Research output: Contribution to conference › Paper › peer-review
-
DESIGN AND IMPLEMENTATION OF A TRANSPORT PROTOCOL FOR IPC IN LAN ENVIRONMENT.
Lee, K., An, S., Lee, Y. & Oh, G., 1987, p. 861-865. 5 p.Research output: Contribution to conference › Paper › peer-review
-
Design of a controller using successive approximation for singularly perturbed bilinear systems
Chang, J. W., Kim, B. S. & Lim, M. T., 2001, p. 657-661. 5 p.Research output: Contribution to conference › Paper › peer-review
1 Citation (Scopus) -
Design of a firewire based data acquisition system for use in animal PET scanners
Lewellen, T. K., Laymon, C. M., Miyaoka, R. S., Lee, K. S. & Kinahan, P. E., 2002, p. 1974-1978. 5 p.Research output: Contribution to conference › Paper › peer-review
9 Citations (Scopus) -
Design of a manipulator for tele-operation applications
Ko, H. K., Kim, K. H., Kwon, H. C. & Cho, C. H., 2011, p. 1234-1238. 5 p.Research output: Contribution to conference › Paper › peer-review
Open Access2 Citations (Scopus) -
Design of a robust thickness controller for a single-stand cold rolling mill
Hwang, G., Ahn, H. S., Kim, D. H., Yoon, T. W., Oh, S. R. & Kim, K. B., 1996, p. 468-473. 6 p.Research output: Contribution to conference › Paper › peer-review
2 Citations (Scopus) -
Design of haptic device for excavator with pressure transmitter
Kim, D., Oh, K. W., Kim, N., Chu, B., Hong, D., Kim, Y. K. & Hong, S. H., 2010, p. 147-154. 8 p.Research output: Contribution to conference › Paper › peer-review
2 Citations (Scopus) -
Design of New Front-End Electronics for Animal Pet
Deng, Z., Yeom, J. Y., Ishitsu, T., Nakazawa, M., Takahashi, H. & Murayama, H., 2002, p. 1543-1546. 4 p.Research output: Contribution to conference › Paper › peer-review
7 Citations (Scopus) -
Design of wireless control station for intelligent excavator
Moon, S., Hong, D., Kim, Y. & Kim, B., 2008, p. 880-883. 4 p.Research output: Contribution to conference › Paper › peer-review
-
Detecting common mode failures in N-version software using weakest precondition analysis
Yoon, G. S., Cha, S. D., Kwon, Y. R. & Yoo, C. H., 1997, p. 272-280. 9 p.Research output: Contribution to conference › Paper › peer-review
1 Citation (Scopus) -
Detection of post-translational modifications by comparison of intact proteins with tryptic digests in a complex biological sample
Taylor, P. K., Lee, S. W., Masselon, C., Pasa-Tolic, L., Auberry, D. L., Lipton, M. S. & Smith, R. D., 2002, p. 157-158. 2 p.Research output: Contribution to conference › Paper › peer-review
-
Detector concepts
Aarons, G., Abe, T., Abernathy, J., Ablikim, M., Abramowicz, H., Adey, D., Adloff, C., Adolphsen, C., Afanaciev, K., Agapov, I., Ahn, J. K., Aihara, H., Akemoto, M., Del CarmenAlabau, M., Albert, J., Albrecht, H., Albrecht, M., Alesini, D., Alexander, G., Alexander, J., & 1,795 others , 2005.Research output: Contribution to conference › Paper › peer-review
-
Determination of interface flow margin for voltage stability analysis using the modified continuation power flow
Song, H., Kim, S., Lee, B., Kwon, S. H. & Ajjarapu, V., 2000, p. 32-37. 6 p.Research output: Contribution to conference › Paper › peer-review
1 Citation (Scopus) -
Developing an AB-initio human-machine interface for an ultrahigh temperature mems sensor made from a novel polymer derived ceramic
Kong, J., Maute, K., Frangopol, D., Liew, L. A., Saravanan, R. A., Bright, V. M. & Raj, R., 2002.Research output: Contribution to conference › Paper › peer-review
-
Developing scratch-resistant clear coating for automotive by using molecular necklace cross-linker
Moon, S. W., Lee, J., Seo, J., Seo, J. H. & Choi, B. H., 2019.Research output: Contribution to conference › Paper › peer-review
-
Development of a Cheap and Portable Sensing System for Electrochemical Genotyping
Cho, S., Seong, N. & Pak, J. J., 2002, p. 233-236. 4 p.Research output: Contribution to conference › Paper › peer-review
3 Citations (Scopus) -
Development of a Data Acquisition System for the MiCES Small Animal PET Scanner
Lewellen, T. K., Laymon, C. M., Miyaoka, R. S., Janes, M., Park, B., Lee, K. & Kinahan, P. E., 2002, p. 1066-1070. 5 p.Research output: Contribution to conference › Paper › peer-review
7 Citations (Scopus) -
Development of a Piezoelectric Polymer-based Sensorized Microgripper for Microassembly and Micromanipulation
Kim, D. H., Kim, B., Kang, H. & Ju, B. K., 2003, p. 1864-1869. 6 p.Research output: Contribution to conference › Paper › peer-review
1 Citation (Scopus) -
Development of a waveform sampling front-end ASIC for PET
Yeom, J. Y., Ishitsu, T. & Takahashi, H., 2004, p. 567-568. 2 p.Research output: Contribution to conference › Paper › peer-review
2 Citations (Scopus) -
Development of building-façade maintenance robot with docking station based on vertical climbing mechanism
Moon, S. M., Hong, D. H., Kim, S. W. & Park, S. R., 2011, p. 1221-1222. 2 p.Research output: Contribution to conference › Paper › peer-review
Open Access3 Citations (Scopus)