A microstrip phase shifter design using a switch-loaded ground plate

Dowon Kim; Moonil Kim

doi:10.1093/ietcom/e89-b.6.1873

A microstrip phase shifter design using a switch-loaded ground plate

Dowon Kim, Moonil Kim

School of Electrical Engineering

Research output: Contribution to journal › Article › peer-review

Abstract

A microstrip phase shifter design that uses a reconfigurable metal pattern on the EBG ground plate is introduced. The EBG ground plate metal pattern contains a linear array of thin slots with switching devices loaded at the center. This design can vary the phase constant with minimum mismatch loss over a large frequency bandwidth. Several test ground plates without actual switching devices were used to verify the design concept.

Original language	English
Pages (from-to)	1873-1875
Number of pages	3
Journal	IEICE Transactions on Communications
Volume	E89-B
Issue number	6
DOIs	https://doi.org/10.1093/ietcom/e89-b.6.1873
Publication status	Published - 2006 Jun

Keywords

Electromagnetic bandgap
Microstrip phase shifter
Reconfigurable ground plane

ASJC Scopus subject areas

Software
Computer Networks and Communications
Electrical and Electronic Engineering

Access to Document

10.1093/ietcom/e89-b.6.1873

Cite this

@article{30a4b561db204b91a9aceb8869cb5361,

title = "A microstrip phase shifter design using a switch-loaded ground plate",

abstract = "A microstrip phase shifter design that uses a reconfigurable metal pattern on the EBG ground plate is introduced. The EBG ground plate metal pattern contains a linear array of thin slots with switching devices loaded at the center. This design can vary the phase constant with minimum mismatch loss over a large frequency bandwidth. Several test ground plates without actual switching devices were used to verify the design concept.",

keywords = "Electromagnetic bandgap, Microstrip phase shifter, Reconfigurable ground plane",

author = "Dowon Kim and Moonil Kim",

year = "2006",

month = jun,

doi = "10.1093/ietcom/e89-b.6.1873",

language = "English",

volume = "E89-B",

pages = "1873--1875",

journal = "IEICE Transactions on Communications",

issn = "0916-8516",

publisher = "Maruzen Co., Ltd/Maruzen Kabushikikaisha",

number = "6",

}

TY - JOUR

T1 - A microstrip phase shifter design using a switch-loaded ground plate

AU - Kim, Dowon

AU - Kim, Moonil

PY - 2006/6

Y1 - 2006/6

N2 - A microstrip phase shifter design that uses a reconfigurable metal pattern on the EBG ground plate is introduced. The EBG ground plate metal pattern contains a linear array of thin slots with switching devices loaded at the center. This design can vary the phase constant with minimum mismatch loss over a large frequency bandwidth. Several test ground plates without actual switching devices were used to verify the design concept.

AB - A microstrip phase shifter design that uses a reconfigurable metal pattern on the EBG ground plate is introduced. The EBG ground plate metal pattern contains a linear array of thin slots with switching devices loaded at the center. This design can vary the phase constant with minimum mismatch loss over a large frequency bandwidth. Several test ground plates without actual switching devices were used to verify the design concept.

KW - Electromagnetic bandgap

KW - Microstrip phase shifter

KW - Reconfigurable ground plane

UR - http://www.scopus.com/inward/record.url?scp=33745439480&partnerID=8YFLogxK

U2 - 10.1093/ietcom/e89-b.6.1873

DO - 10.1093/ietcom/e89-b.6.1873

M3 - Article

AN - SCOPUS:33745439480

SN - 0916-8516

VL - E89-B

SP - 1873

EP - 1875

JO - IEICE Transactions on Communications

JF - IEICE Transactions on Communications

IS - 6

ER -

A microstrip phase shifter design using a switch-loaded ground plate

Abstract

Keywords

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this