Absorption Characteristics of Ammonia-Water System in the Cylindrical Tube Absorber

Ki Bong Lee; Byung Hee Chun; Jae Cheol Lee; Chan Jin Park; Sung Hyun Kim

doi:10.1007/BF02706879

Absorption Characteristics of Ammonia-Water System in the Cylindrical Tube Absorber

Ki Bong Lee, Byung Hee Chun, Jae Cheol Lee, Chan Jin Park, Sung Hyun Kim

Research output: Contribution to journal › Article › peer-review

3 Citations (Scopus)

Abstract

Experimental analysis was performed in a cylindrical tube absorber which is considered to be suitable for the bubble mode. Characteristics such as concentration, temperature, and pressure were measured and they reflected the condition of absorber well. The variation of characteristics was conspicuous near the inlet region of the ammonia gas. The ammonia gas and the solution flowed cocurrently and countercurrently and the results were compared.

Original language	English
Pages (from-to)	87-92
Number of pages	6
Journal	Korean Journal of Chemical Engineering
Volume	19
Issue number	1
DOIs	https://doi.org/10.1007/BF02706879
Publication status	Published - 2002 Jan

Bibliographical note

Funding Information:
This study was supported by research grants from the Korea Science and Engineering Foundation (KOSEF)through the Applied Rheology Center (ARC), an official ERC, at Korea Uifiversity, Seoul, Korea.

Copyright:
Copyright 2018 Elsevier B.V., All rights reserved.

Keywords

Absorption System
Ammonia-water
Cylindrical Tube Absorber
Gas Holdup
Mass Transfer

ASJC Scopus subject areas

General Chemistry
General Chemical Engineering

Access to Document

10.1007/BF02706879

Cite this

@article{1f1166ab0e5f4af38aee447a4657734b,

title = "Absorption Characteristics of Ammonia-Water System in the Cylindrical Tube Absorber",

abstract = "Experimental analysis was performed in a cylindrical tube absorber which is considered to be suitable for the bubble mode. Characteristics such as concentration, temperature, and pressure were measured and they reflected the condition of absorber well. The variation of characteristics was conspicuous near the inlet region of the ammonia gas. The ammonia gas and the solution flowed cocurrently and countercurrently and the results were compared.",

keywords = "Absorption System, Ammonia-water, Cylindrical Tube Absorber, Gas Holdup, Mass Transfer",

author = "Lee, {Ki Bong} and Chun, {Byung Hee} and Lee, {Jae Cheol} and Park, {Chan Jin} and Kim, {Sung Hyun}",

note = "Funding Information: This study was supported by research grants from the Korea Science and Engineering Foundation (KOSEF)through the Applied Rheology Center (ARC), an official ERC, at Korea Uifiversity, Seoul, Korea. Copyright: Copyright 2018 Elsevier B.V., All rights reserved.",

year = "2002",

month = jan,

doi = "10.1007/BF02706879",

language = "English",

volume = "19",

pages = "87--92",

journal = "Korean Journal of Chemical Engineering",

issn = "0256-1115",

publisher = "Springer",

number = "1",

}

TY - JOUR

T1 - Absorption Characteristics of Ammonia-Water System in the Cylindrical Tube Absorber

AU - Lee, Ki Bong

AU - Chun, Byung Hee

AU - Lee, Jae Cheol

AU - Park, Chan Jin

AU - Kim, Sung Hyun

N1 - Funding Information: This study was supported by research grants from the Korea Science and Engineering Foundation (KOSEF)through the Applied Rheology Center (ARC), an official ERC, at Korea Uifiversity, Seoul, Korea. Copyright: Copyright 2018 Elsevier B.V., All rights reserved.

PY - 2002/1

Y1 - 2002/1

N2 - Experimental analysis was performed in a cylindrical tube absorber which is considered to be suitable for the bubble mode. Characteristics such as concentration, temperature, and pressure were measured and they reflected the condition of absorber well. The variation of characteristics was conspicuous near the inlet region of the ammonia gas. The ammonia gas and the solution flowed cocurrently and countercurrently and the results were compared.

AB - Experimental analysis was performed in a cylindrical tube absorber which is considered to be suitable for the bubble mode. Characteristics such as concentration, temperature, and pressure were measured and they reflected the condition of absorber well. The variation of characteristics was conspicuous near the inlet region of the ammonia gas. The ammonia gas and the solution flowed cocurrently and countercurrently and the results were compared.

KW - Absorption System

KW - Ammonia-water

KW - Cylindrical Tube Absorber

KW - Gas Holdup

KW - Mass Transfer

UR - http://www.scopus.com/inward/record.url?scp=0036106959&partnerID=8YFLogxK

U2 - 10.1007/BF02706879

DO - 10.1007/BF02706879

M3 - Article

AN - SCOPUS:0036106959

SN - 0256-1115

VL - 19

SP - 87

EP - 92

JO - Korean Journal of Chemical Engineering

JF - Korean Journal of Chemical Engineering

IS - 1

ER -

Absorption Characteristics of Ammonia-Water System in the Cylindrical Tube Absorber

Abstract

Bibliographical note

Keywords

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this