Auto-mapping and configuration method of IEC 61850 information model based on OPC UA

In Jae Shin; Byung Kwen Song; Doo Seop Eom

doi:10.3390/en9110901

Auto-mapping and configuration method of IEC 61850 information model based on OPC UA

In Jae Shin, Byung Kwen Song, Doo Seop Eom

Research output: Contribution to journal › Article › peer-review

17 Citations (Scopus)

Abstract

The open-platform communication (OPC) unified architecture (UA) (IEC62541) is introduced as a key technology for realizing a variety of smart grid (SG) use cases enabling relevant automation and control tasks. The OPC UA can expand interoperability between power systems. The top-level SG management platform needs independent middleware to transparently manage the power information technology (IT) systems, including the IEC 61850. To expand interoperability between the power system for a large number of stakeholders and various standards, this paper focuses on the IEC 61850 for the digital substation. In this paper, we propose the interconnection method to integrate communication with OPC UA and convert OPC UA AddressSpace using system configuration description language (SCL) of IEC 61850. We implemented the mapping process for the verification of the interconnection method. The interconnection method in this paper can expand interoperability between power systems for OPC UA integration for various data structures in the smart grid.

Original language	English
Article number	901
Journal	Energies
Volume	9
Issue number	11
DOIs	https://doi.org/10.3390/en9110901
Publication status	Published - 2016 Nov

Bibliographical note

Funding Information:
This research was supported by the Energy Technology Development Project through the Korea Institute of Energy Technology Evaluation and Planning (KETEP) funded by the Ministry of Trade, Industry and Energy (MOTIE) (No.: 20131020400660 and No.: 20131020402080) and Seokyeong University (2016).

Publisher Copyright:
© 2016 by the authors; licensee MDPI.

Keywords

Abstract communication service interface (ACSI)
IEC 61850
Open-platform communication (OPC) unified architecture (UA)
Smart grid
System configuration description language (SCL)

ASJC Scopus subject areas

Renewable Energy, Sustainability and the Environment
Energy Engineering and Power Technology
Energy (miscellaneous)
Control and Optimization
Electrical and Electronic Engineering

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

Access to Document

10.3390/en9110901

Cite this

@article{cb87cae6220a42ca86149d634875bf70,

title = "Auto-mapping and configuration method of IEC 61850 information model based on OPC UA",

abstract = "The open-platform communication (OPC) unified architecture (UA) (IEC62541) is introduced as a key technology for realizing a variety of smart grid (SG) use cases enabling relevant automation and control tasks. The OPC UA can expand interoperability between power systems. The top-level SG management platform needs independent middleware to transparently manage the power information technology (IT) systems, including the IEC 61850. To expand interoperability between the power system for a large number of stakeholders and various standards, this paper focuses on the IEC 61850 for the digital substation. In this paper, we propose the interconnection method to integrate communication with OPC UA and convert OPC UA AddressSpace using system configuration description language (SCL) of IEC 61850. We implemented the mapping process for the verification of the interconnection method. The interconnection method in this paper can expand interoperability between power systems for OPC UA integration for various data structures in the smart grid.",

keywords = "Abstract communication service interface (ACSI), IEC 61850, Open-platform communication (OPC) unified architecture (UA), Smart grid, System configuration description language (SCL)",

author = "Shin, {In Jae} and Song, {Byung Kwen} and Eom, {Doo Seop}",

note = "Funding Information: This research was supported by the Energy Technology Development Project through the Korea Institute of Energy Technology Evaluation and Planning (KETEP) funded by the Ministry of Trade, Industry and Energy (MOTIE) (No.: 20131020400660 and No.: 20131020402080) and Seokyeong University (2016). Publisher Copyright: {\textcopyright} 2016 by the authors; licensee MDPI.",

year = "2016",

month = nov,

doi = "10.3390/en9110901",

language = "English",

volume = "9",

journal = "Energies",

issn = "1996-1073",

publisher = "Multidisciplinary Digital Publishing Institute (MDPI)",

number = "11",

}

TY - JOUR

T1 - Auto-mapping and configuration method of IEC 61850 information model based on OPC UA

AU - Shin, In Jae

AU - Song, Byung Kwen

AU - Eom, Doo Seop

N1 - Funding Information: This research was supported by the Energy Technology Development Project through the Korea Institute of Energy Technology Evaluation and Planning (KETEP) funded by the Ministry of Trade, Industry and Energy (MOTIE) (No.: 20131020400660 and No.: 20131020402080) and Seokyeong University (2016). Publisher Copyright: © 2016 by the authors; licensee MDPI.

PY - 2016/11

Y1 - 2016/11

N2 - The open-platform communication (OPC) unified architecture (UA) (IEC62541) is introduced as a key technology for realizing a variety of smart grid (SG) use cases enabling relevant automation and control tasks. The OPC UA can expand interoperability between power systems. The top-level SG management platform needs independent middleware to transparently manage the power information technology (IT) systems, including the IEC 61850. To expand interoperability between the power system for a large number of stakeholders and various standards, this paper focuses on the IEC 61850 for the digital substation. In this paper, we propose the interconnection method to integrate communication with OPC UA and convert OPC UA AddressSpace using system configuration description language (SCL) of IEC 61850. We implemented the mapping process for the verification of the interconnection method. The interconnection method in this paper can expand interoperability between power systems for OPC UA integration for various data structures in the smart grid.

AB - The open-platform communication (OPC) unified architecture (UA) (IEC62541) is introduced as a key technology for realizing a variety of smart grid (SG) use cases enabling relevant automation and control tasks. The OPC UA can expand interoperability between power systems. The top-level SG management platform needs independent middleware to transparently manage the power information technology (IT) systems, including the IEC 61850. To expand interoperability between the power system for a large number of stakeholders and various standards, this paper focuses on the IEC 61850 for the digital substation. In this paper, we propose the interconnection method to integrate communication with OPC UA and convert OPC UA AddressSpace using system configuration description language (SCL) of IEC 61850. We implemented the mapping process for the verification of the interconnection method. The interconnection method in this paper can expand interoperability between power systems for OPC UA integration for various data structures in the smart grid.

KW - Abstract communication service interface (ACSI)

KW - IEC 61850

KW - Open-platform communication (OPC) unified architecture (UA)

KW - Smart grid

KW - System configuration description language (SCL)

UR - http://www.scopus.com/inward/record.url?scp=85020398068&partnerID=8YFLogxK

U2 - 10.3390/en9110901

DO - 10.3390/en9110901

M3 - Article

AN - SCOPUS:85020398068

SN - 1996-1073

VL - 9

JO - Energies

JF - Energies

IS - 11

M1 - 901

ER -

Auto-mapping and configuration method of IEC 61850 information model based on OPC UA

Abstract

Bibliographical note

Keywords

ASJC Scopus subject areas

UN SDGs

Access to Document

Other files and links

Fingerprint

Cite this