Bandpass filter design based on vertical split-ring resonators

S. Oh; J. Choi; B. Shin; W. S. Yoon; J. Jeong; J. Lee

doi:10.1049/el.2017.1938

Bandpass filter design based on vertical split-ring resonators

S. Oh
, J. Choi
, B. Shin
, W. S. Yoon
, J. Jeong
, J. Lee^*

^*Corresponding author for this work

Research output: Contribution to journal › Article › peer-review

5 Citations (Scopus)

Abstract

A novel bandpass filter (BPF) design based on vertical split-ring resonators (VSRRs) was developed for single- and dual-band applications. The filter is composed of VSRRs, transmission lines, and apertures. The characteristics of single- and dual-band BPFs using a single VSRR and dual VSRRs, respectively, were investigated. The bandpass characteristics arising from VSSR resonance can be controlled by the VSRR dimensions, and the independent bandpass characteristics of dual VSRRs can be used to implement a dual-band BPF. A full-wave simulation and experimental measurements were used to measure their performance. The simulated results for the single- and dual-band BPFs were in good agreement with the experimental results.

Original language	English
Pages (from-to)	1412-1414
Number of pages	3
Journal	Electronics Letters
Volume	53
Issue number	21
DOIs	https://doi.org/10.1049/el.2017.1938
Publication status	Published - 2017 Oct 12

ASJC Scopus subject areas

Electrical and Electronic Engineering

Access to Document

10.1049/el.2017.1938

Cite this

@article{0e3bf2ed8583456c960319e0e2f8acb3,

title = "Bandpass filter design based on vertical split-ring resonators",

abstract = "A novel bandpass filter (BPF) design based on vertical split-ring resonators (VSRRs) was developed for single- and dual-band applications. The filter is composed of VSRRs, transmission lines, and apertures. The characteristics of single- and dual-band BPFs using a single VSRR and dual VSRRs, respectively, were investigated. The bandpass characteristics arising from VSSR resonance can be controlled by the VSRR dimensions, and the independent bandpass characteristics of dual VSRRs can be used to implement a dual-band BPF. A full-wave simulation and experimental measurements were used to measure their performance. The simulated results for the single- and dual-band BPFs were in good agreement with the experimental results.",

author = "S. Oh and J. Choi and B. Shin and Yoon, \{W. S.\} and J. Jeong and J. Lee",

year = "2017",

month = oct,

day = "12",

doi = "10.1049/el.2017.1938",

language = "English",

volume = "53",

pages = "1412--1414",

journal = "Electronics Letters",

issn = "0013-5194",

publisher = "John Wiley \& Sons Inc.",

number = "21",

}

TY - JOUR

T1 - Bandpass filter design based on vertical split-ring resonators

AU - Oh, S.

AU - Choi, J.

AU - Shin, B.

AU - Yoon, W. S.

AU - Jeong, J.

AU - Lee, J.

PY - 2017/10/12

Y1 - 2017/10/12

N2 - A novel bandpass filter (BPF) design based on vertical split-ring resonators (VSRRs) was developed for single- and dual-band applications. The filter is composed of VSRRs, transmission lines, and apertures. The characteristics of single- and dual-band BPFs using a single VSRR and dual VSRRs, respectively, were investigated. The bandpass characteristics arising from VSSR resonance can be controlled by the VSRR dimensions, and the independent bandpass characteristics of dual VSRRs can be used to implement a dual-band BPF. A full-wave simulation and experimental measurements were used to measure their performance. The simulated results for the single- and dual-band BPFs were in good agreement with the experimental results.

AB - A novel bandpass filter (BPF) design based on vertical split-ring resonators (VSRRs) was developed for single- and dual-band applications. The filter is composed of VSRRs, transmission lines, and apertures. The characteristics of single- and dual-band BPFs using a single VSRR and dual VSRRs, respectively, were investigated. The bandpass characteristics arising from VSSR resonance can be controlled by the VSRR dimensions, and the independent bandpass characteristics of dual VSRRs can be used to implement a dual-band BPF. A full-wave simulation and experimental measurements were used to measure their performance. The simulated results for the single- and dual-band BPFs were in good agreement with the experimental results.

UR - https://www.scopus.com/pages/publications/85032669805

UR - https://www.scopus.com/pages/publications/85032669805#tab=citedBy

U2 - 10.1049/el.2017.1938

DO - 10.1049/el.2017.1938

M3 - Article

AN - SCOPUS:85032669805

SN - 0013-5194

VL - 53

SP - 1412

EP - 1414

JO - Electronics Letters

JF - Electronics Letters

IS - 21

ER -

Bandpass filter design based on vertical split-ring resonators

Abstract

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this