Carbon-nanotube-based flexible devices using a mechanical transfer method

Kyongsoo Lee, Byeong Kwon Ju

Research output: Contribution to journalArticlepeer-review

5 Citations (Scopus)


We describe a new method for the manufacture of single-walled carbon nanotube (SWCNT)-based electrical devices on flexible substrates. The method involves the deposition of a SWCNT films onto polydimethylsiloxane (PDMS) substrates from rigid substrates using the adhesive property of PDMS. This method is similar to the conventional dry transfer method, which is based on surface-energy modification, except that our method involves mechanical transfer using the adhesive property of PDMS under peculiar conditions. The gas-sensing characteristics of the resulting transferred SWCNT films are presented, showing, for example, that typical flexible sensors exhibit a sensitivity of 17.4% for 4-ppm NO 2 in a vacuum at room temperature. The performances of the devices are slightly reduced when they are bent to a curved profile with a bending radius of 2 cm (15.9%). The field-emission properties are also investigated. From these emitters, the SWCNTs can be turned on with a field as low as 0.9 V/μm, and an emission current density of 0.75 mA/cm 2 at 1.2 V/μm can be attained. Thus, a method for the fabrication of flexible devices is established, which should find practical applications in electronic devices.

Original languageEnglish
Pages (from-to)2082-2086
Number of pages5
JournalPhysica Status Solidi (A) Applications and Materials Science
Issue number10
Publication statusPublished - 2012 Oct


  • carbon nanotubes
  • field-emission displays
  • flexible sensors
  • gas sensors

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Condensed Matter Physics
  • Surfaces and Interfaces
  • Surfaces, Coatings and Films
  • Electrical and Electronic Engineering
  • Materials Chemistry


Dive into the research topics of 'Carbon-nanotube-based flexible devices using a mechanical transfer method'. Together they form a unique fingerprint.

Cite this