Compendium of yield load solutions for strength mis-matched DE(T), SE(B) and C(T) specimens

Yun Jae Kim; Karl Heinz Schwalbe

doi:10.1016/S0013-7944(01)00016-9

Compendium of yield load solutions for strength mis-matched DE(T), SE(B) and C(T) specimens

Yun Jae Kim, Karl Heinz Schwalbe

Research output: Contribution to journal › Article › peer-review

74 Citations (Scopus)

Abstract

In two previous papers, mis-match yield load solutions for middle crack tension and single edge cracked bars in pure bending were derived. These specimens contained cracks which were located in the centre of the weld metal as well as in the interface between weld metal and base plate, and in positions in between. The present paper investigates additional three specimen types, namely double edge crack tension, single edge cracked bend and compact specimens, with cracks in the centre of the weld metal and in the interface between weld metal and base plate. As in the previous investigations, the conditions of plane strain and plane stress are considered. The results are presented as closed form solutions and diagrams.

Original language	English
Pages (from-to)	1137-1151
Number of pages	15
Journal	Engineering Fracture Mechanics
Volume	68
Issue number	9
DOIs	https://doi.org/10.1016/S0013-7944(01)00016-9
Publication status	Published - 2001 Jun
Externally published	Yes

Bibliographical note

Funding Information:
This work was performed as part of the EU project SINTAP (contract no. BRPRT95-0024). The authors acknowledge the financial support by the European Commission.

Copyright:
Copyright 2007 Elsevier B.V., All rights reserved.

Keywords

Finite element limit analysis
Strength mis-match
Welded joints
Yield load

ASJC Scopus subject areas

General Materials Science
Mechanics of Materials
Mechanical Engineering

Access to Document

10.1016/S0013-7944(01)00016-9

Cite this

@article{8816decae693426aa9c4ff1fb40f5e33,

title = "Compendium of yield load solutions for strength mis-matched DE(T), SE(B) and C(T) specimens",

abstract = "In two previous papers, mis-match yield load solutions for middle crack tension and single edge cracked bars in pure bending were derived. These specimens contained cracks which were located in the centre of the weld metal as well as in the interface between weld metal and base plate, and in positions in between. The present paper investigates additional three specimen types, namely double edge crack tension, single edge cracked bend and compact specimens, with cracks in the centre of the weld metal and in the interface between weld metal and base plate. As in the previous investigations, the conditions of plane strain and plane stress are considered. The results are presented as closed form solutions and diagrams.",

keywords = "Finite element limit analysis, Strength mis-match, Welded joints, Yield load",

author = "Kim, {Yun Jae} and Schwalbe, {Karl Heinz}",

note = "Funding Information: This work was performed as part of the EU project SINTAP (contract no. BRPRT95-0024). The authors acknowledge the financial support by the European Commission. Copyright: Copyright 2007 Elsevier B.V., All rights reserved.",

year = "2001",

month = jun,

doi = "10.1016/S0013-7944(01)00016-9",

language = "English",

volume = "68",

pages = "1137--1151",

journal = "Engineering Fracture Mechanics",

issn = "0013-7944",

publisher = "Elsevier B.V.",

number = "9",

}

TY - JOUR

T1 - Compendium of yield load solutions for strength mis-matched DE(T), SE(B) and C(T) specimens

AU - Kim, Yun Jae

AU - Schwalbe, Karl Heinz

N1 - Funding Information: This work was performed as part of the EU project SINTAP (contract no. BRPRT95-0024). The authors acknowledge the financial support by the European Commission. Copyright: Copyright 2007 Elsevier B.V., All rights reserved.

PY - 2001/6

Y1 - 2001/6

N2 - In two previous papers, mis-match yield load solutions for middle crack tension and single edge cracked bars in pure bending were derived. These specimens contained cracks which were located in the centre of the weld metal as well as in the interface between weld metal and base plate, and in positions in between. The present paper investigates additional three specimen types, namely double edge crack tension, single edge cracked bend and compact specimens, with cracks in the centre of the weld metal and in the interface between weld metal and base plate. As in the previous investigations, the conditions of plane strain and plane stress are considered. The results are presented as closed form solutions and diagrams.

AB - In two previous papers, mis-match yield load solutions for middle crack tension and single edge cracked bars in pure bending were derived. These specimens contained cracks which were located in the centre of the weld metal as well as in the interface between weld metal and base plate, and in positions in between. The present paper investigates additional three specimen types, namely double edge crack tension, single edge cracked bend and compact specimens, with cracks in the centre of the weld metal and in the interface between weld metal and base plate. As in the previous investigations, the conditions of plane strain and plane stress are considered. The results are presented as closed form solutions and diagrams.

KW - Finite element limit analysis

KW - Strength mis-match

KW - Welded joints

KW - Yield load

UR - http://www.scopus.com/inward/record.url?scp=0035368137&partnerID=8YFLogxK

U2 - 10.1016/S0013-7944(01)00016-9

DO - 10.1016/S0013-7944(01)00016-9

M3 - Article

AN - SCOPUS:0035368137

SN - 0013-7944

VL - 68

SP - 1137

EP - 1151

JO - Engineering Fracture Mechanics

JF - Engineering Fracture Mechanics

IS - 9

ER -

Compendium of yield load solutions for strength mis-matched DE(T), SE(B) and C(T) specimens

Abstract

Bibliographical note

Keywords

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this