Fabrication and characterization of an anode-side, substrate-supported planar SOFC

Nguyen Xuan Phuong Vo, Quang Nhu Ho, Tae Hoon Lim, Seong Ahn Hong, Suk Woo Nam, Sung Pil Yoon

Research output: Contribution to journalArticlepeer-review

2 Citations (Scopus)


This paper describes a simple and reliable method of fabricating an anode-side, substrate-supported (AS-SS) planar cell constructed of a porous 3YSZ support and thin, selective-area layers of NiO/YSZ anode, 8YSZ electrolyte, and LSM cathode sequentially coated on the support. Extension of triple phase boundary (TBP) at the electrode/electrolyte interfaces was done by coating SDC thin films within the pores of the electrodes using a sol-gel technique to improve performance of the cell. An anode-supported (AS) planar cell was produced using the same procedure and technique, thus expected to have identical cell components except for the anode morphology. The AS-SS planar cell exhibited a maximum power density of 0.85 Wcm -2 which is higher than the 0.60 Wcm -2 achieved from the AS planar cell at 800°C in humidified hydrogen versus air.

Original languageEnglish
Article number051004
JournalJournal of Fuel Cell Science and Technology
Issue number5
Publication statusPublished - 2011

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Renewable Energy, Sustainability and the Environment
  • Energy Engineering and Power Technology
  • Mechanics of Materials
  • Mechanical Engineering


Dive into the research topics of 'Fabrication and characterization of an anode-side, substrate-supported planar SOFC'. Together they form a unique fingerprint.

Cite this