Abstract
Omega-shaped-gate (OSG) nanowire-based field effect transistors (FETs) have attracted a great deal of attention recently, because theoretical simulations predicted that they should have a higher device performance than nanowire-based FETs with other gate geometries. OSG FETs with channels composed of ZnO nanowires were successfully fabricated in this study using photolithographic processes. In the OSG FETs fabricated on oxidized Si substrates, the channels composed of ZnO nanowires with diameters of about 110 nm are coated with Al 2O3 using atomic layer deposition, which surrounds the channels and acts as a gate dielectric. About 80% of the surfaces of the nanowires coated with Al2O3 are covered with the gate metal to form OSG FETs. A representative OSG FET fabricated in this study exhibits a mobility of 30.2 cm2/ (V s), a peak transconductance of 0.4 μS (Vg = -2.2 V), and an /on//off ratio of 107. To the best of our knowledge, the value of the / on//offratio obtained from this OSG FET is higher than that of any of the previously reported nanowire-based FETs. Its mobility, peak transconductance, and /on//off ratio are remarkably enhanced by 3.5, 32, and 106 times, respectively, compared with a back-gate FET with the same ZnO nanowire channel as utilized in the OSG FET.
Original language | English |
---|---|
Pages (from-to) | 1454-1458 |
Number of pages | 5 |
Journal | Nano Letters |
Volume | 6 |
Issue number | 7 |
DOIs | |
Publication status | Published - 2006 Jul |
ASJC Scopus subject areas
- Bioengineering
- General Chemistry
- General Materials Science
- Condensed Matter Physics
- Mechanical Engineering