Abstract
This paper propose estimation equations of transient C(t)-integrals for general material properties where plastic and creep stress exponent are different under load and displacement control. The new equations are made by modifying the plasticity correction term in the existing equations. The modified plasticity corrections term is expressed in terms of initial elastic-plastic and steady state creep stress fields. For validation, elastic-plastic-creep finite element analysis are performed. FE results are compared with predicted C(t) results using proposed equations. Good agreement with FE results is found even when plastic and creep stress exponents are different.
Original language | English |
---|---|
Pages (from-to) | 817-824 |
Number of pages | 8 |
Journal | Procedia Structural Integrity |
Volume | 2 |
DOIs | |
Publication status | Published - 2016 |
Bibliographical note
Funding Information:This research was supported by the National Research Foundation of Korea (NRF) funded by the Ministry of Science, ICT and Future Planning (NRF-2013M2A7A1076396, NRF-2013M2B2B1075733).
Publisher Copyright:
Copyright © 2016 The Authors. Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license.
Keywords
- Crack-tip stress fields
- Elastic-plastic-creep
- Load and displacement control
- Transient C(t)-integrals
ASJC Scopus subject areas
- Mechanics of Materials
- Mechanical Engineering
- General Materials Science
- Civil and Structural Engineering