Heterogeneous three-dimensional assembly of metamaterials and metadevices by modular transfer printing

Seungwoo Lee; Byungsoo Kang; Hohyun Keum; Alaa Alokaily; Hyun Sung Park; Numair Ahmed; John A. Rogers; Placid M. Ferreira; Seok Kim; Bumki Min

doi:10.1109/CLEOPR.2015.7376145

Heterogeneous three-dimensional assembly of metamaterials and metadevices by modular transfer printing

Seungwoo Lee, Byungsoo Kang, Hohyun Keum, Alaa Alokaily, Hyun Sung Park, Numair Ahmed, John A. Rogers, Placid M. Ferreira, Seok Kim, Bumki Min

KU-KIST Graduate School of Converging Science and Technology

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Abstract

A metamaterial transfer printing method done by adhesion switching of viscoelastic stamp is presented. 3-D stack of heterogeneous material can be built at a desired position regardless of target substrate even on cheese.

Original language	English
Title of host publication	2015 11th Conference on Lasers and Electro-Optics Pacific Rim, CLEO-PR 2015
Publisher	Institute of Electrical and Electronics Engineers Inc.
ISBN (Electronic)	9781467371094
DOIs	https://doi.org/10.1109/CLEOPR.2015.7376145
Publication status	Published - 2016 Jan 7
Event	11th Conference on Lasers and Electro-Optics Pacific Rim, CLEO-PR 2015 - Busan, Korea, Republic of Duration: 2015 Aug 24 → 2015 Aug 28

Publication series

Name	2015 11th Conference on Lasers and Electro-Optics Pacific Rim, CLEO-PR 2015
Volume	2

Other

Other	11th Conference on Lasers and Electro-Optics Pacific Rim, CLEO-PR 2015
Country/Territory	Korea, Republic of
City	Busan
Period	15/8/24 → 15/8/28

ASJC Scopus subject areas

Electrical and Electronic Engineering
Atomic and Molecular Physics, and Optics

Access to Document

10.1109/CLEOPR.2015.7376145

Cite this

Lee, S., Kang, B., Keum, H., Alokaily, A., Park, H. S., Ahmed, N., Rogers, J. A., Ferreira, P. M., Kim, S., & Min, B. (2016). Heterogeneous three-dimensional assembly of metamaterials and metadevices by modular transfer printing. In 2015 11th Conference on Lasers and Electro-Optics Pacific Rim, CLEO-PR 2015 Article 7376145 (2015 11th Conference on Lasers and Electro-Optics Pacific Rim, CLEO-PR 2015; Vol. 2). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/CLEOPR.2015.7376145

Heterogeneous three-dimensional assembly of metamaterials and metadevices by modular transfer printing. / Lee, Seungwoo; Kang, Byungsoo; Keum, Hohyun et al.
2015 11th Conference on Lasers and Electro-Optics Pacific Rim, CLEO-PR 2015. Institute of Electrical and Electronics Engineers Inc., 2016. 7376145 (2015 11th Conference on Lasers and Electro-Optics Pacific Rim, CLEO-PR 2015; Vol. 2).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Lee, S, Kang, B, Keum, H, Alokaily, A, Park, HS, Ahmed, N, Rogers, JA, Ferreira, PM, Kim, S & Min, B 2016, Heterogeneous three-dimensional assembly of metamaterials and metadevices by modular transfer printing. in 2015 11th Conference on Lasers and Electro-Optics Pacific Rim, CLEO-PR 2015., 7376145, 2015 11th Conference on Lasers and Electro-Optics Pacific Rim, CLEO-PR 2015, vol. 2, Institute of Electrical and Electronics Engineers Inc., 11th Conference on Lasers and Electro-Optics Pacific Rim, CLEO-PR 2015, Busan, Korea, Republic of, 15/8/24. https://doi.org/10.1109/CLEOPR.2015.7376145

Lee S, Kang B, Keum H, Alokaily A, Park HS, Ahmed N et al. Heterogeneous three-dimensional assembly of metamaterials and metadevices by modular transfer printing. In 2015 11th Conference on Lasers and Electro-Optics Pacific Rim, CLEO-PR 2015. Institute of Electrical and Electronics Engineers Inc. 2016. 7376145. (2015 11th Conference on Lasers and Electro-Optics Pacific Rim, CLEO-PR 2015). doi: 10.1109/CLEOPR.2015.7376145

Lee, Seungwoo ; Kang, Byungsoo ; Keum, Hohyun et al. / Heterogeneous three-dimensional assembly of metamaterials and metadevices by modular transfer printing. 2015 11th Conference on Lasers and Electro-Optics Pacific Rim, CLEO-PR 2015. Institute of Electrical and Electronics Engineers Inc., 2016. (2015 11th Conference on Lasers and Electro-Optics Pacific Rim, CLEO-PR 2015).

@inproceedings{5f9bfa87c9d6499580d1120fb4f87ce6,

title = "Heterogeneous three-dimensional assembly of metamaterials and metadevices by modular transfer printing",

abstract = "A metamaterial transfer printing method done by adhesion switching of viscoelastic stamp is presented. 3-D stack of heterogeneous material can be built at a desired position regardless of target substrate even on cheese.",

author = "Seungwoo Lee and Byungsoo Kang and Hohyun Keum and Alaa Alokaily and Park, {Hyun Sung} and Numair Ahmed and Rogers, {John A.} and Ferreira, {Placid M.} and Seok Kim and Bumki Min",

note = "Funding Information: This work was supported by the National Research Foundation of Korea (NRF) grant funded by the Korea government (MEST) (No. 2008-0062235, 2009-0069459, 2010-0012058, 2011-0020186, and 2011-0028151). P. M. F. acknowledges the GFR Program (2011-0031640) sponsored by the MEST Publisher Copyright: {\textcopyright} 2015 IEEE.; 11th Conference on Lasers and Electro-Optics Pacific Rim, CLEO-PR 2015 ; Conference date: 24-08-2015 Through 28-08-2015",

year = "2016",

month = jan,

day = "7",

doi = "10.1109/CLEOPR.2015.7376145",

language = "English",

series = "2015 11th Conference on Lasers and Electro-Optics Pacific Rim, CLEO-PR 2015",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

booktitle = "2015 11th Conference on Lasers and Electro-Optics Pacific Rim, CLEO-PR 2015",

}

TY - GEN

T1 - Heterogeneous three-dimensional assembly of metamaterials and metadevices by modular transfer printing

AU - Lee, Seungwoo

AU - Kang, Byungsoo

AU - Keum, Hohyun

AU - Alokaily, Alaa

AU - Park, Hyun Sung

AU - Ahmed, Numair

AU - Rogers, John A.

AU - Ferreira, Placid M.

AU - Kim, Seok

AU - Min, Bumki

N1 - Funding Information: This work was supported by the National Research Foundation of Korea (NRF) grant funded by the Korea government (MEST) (No. 2008-0062235, 2009-0069459, 2010-0012058, 2011-0020186, and 2011-0028151). P. M. F. acknowledges the GFR Program (2011-0031640) sponsored by the MEST Publisher Copyright: © 2015 IEEE.

PY - 2016/1/7

Y1 - 2016/1/7

N2 - A metamaterial transfer printing method done by adhesion switching of viscoelastic stamp is presented. 3-D stack of heterogeneous material can be built at a desired position regardless of target substrate even on cheese.

AB - A metamaterial transfer printing method done by adhesion switching of viscoelastic stamp is presented. 3-D stack of heterogeneous material can be built at a desired position regardless of target substrate even on cheese.

UR - http://www.scopus.com/inward/record.url?scp=84964010041&partnerID=8YFLogxK

U2 - 10.1109/CLEOPR.2015.7376145

DO - 10.1109/CLEOPR.2015.7376145

M3 - Conference contribution

AN - SCOPUS:84964010041

T3 - 2015 11th Conference on Lasers and Electro-Optics Pacific Rim, CLEO-PR 2015

BT - 2015 11th Conference on Lasers and Electro-Optics Pacific Rim, CLEO-PR 2015

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 11th Conference on Lasers and Electro-Optics Pacific Rim, CLEO-PR 2015

Y2 - 24 August 2015 through 28 August 2015

ER -

Heterogeneous three-dimensional assembly of metamaterials and metadevices by modular transfer printing

Abstract

Publication series

Other

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this