CH3NH3PbI3-xClx(MAPbI3-xClx) mixed halide perovskite powder with uniform composition was synthesized via simple solution chemistry, which demonstrates highly reproducible, efficient planar type MAPbI3-xClx mixed halide perovskite solar cells. Pure MAPbI3-xClx mixed halide perovskite powder was synthesized by reacting a 3:1 molar ratio of MAI:PbCl2 powder mixture in isopropanol (IPA) solution for 30 min at 60 °C with subsequent repeated centrifugation and washing in IPA. IPA functions as both the reaction medium for the formation of MAPbI3-xClx mixed halide and a selective remover of unreacted MAI and MACl byproducts. Accordingly, we could deposit a pinhole-free dense MAPbI3-xClx mixed halide perovskite film on a TiO2/FTO substrate through a simple one step spin-coating of pure MAPbI3-xClx mixed halide perovskite powder in DMF solution with HI additive, without further long heat-treatment processes. The deposited MAPbI3-xClx mixed halide perovskite film revealed uniform composition throughout the entire area, and the ratio of Cl to I + Cl and I + Cl to Pb was constant at ∼0.03 and ∼1/3, respectively. On the other hand, the conventional MAPbI3-xClx mixed halide perovskite film prepared by the long heat-treatment process had non-uniform composition because the ratio of Cl to I + Cl fluctuated greatly from 0 to 7.2. The average efficiency of planar type MAPbI3-xClx mixed halide perovskite solar cells was 18.65% ± 0.30% and the champion cell had 1.11 V Voc, 22.1 mA cm-2Jsc, 77% F.F., and 18.9% η for forward scan conditions and 1.11 V Voc, 22.1 mA cm-2Jsc, 78% F.F., and 19.1% η for reverse scan conditions. Although the thickness of the MAPbI3-xClx mixed halide perovskite layer varied from ∼500 nm to ∼900 nm, the efficiency was within the range of 18.3%-19.0%.
Bibliographical notePublisher Copyright:
© 2016 The Royal Society of Chemistry.
ASJC Scopus subject areas
- Materials Science(all)