Influence of ambient gases during the frit-sealing cycle on the emission characteristics of Mo-FEAs

N. Y. Lee; B. C. Kim; J. H. Jung; M. S. Kang; H. Kim; B. K. Ju; Y. H. Lee; M. H. Oh; J. Jang; S. Ahn

doi:10.1889/1.1985288

Influence of ambient gases during the frit-sealing cycle on the emission characteristics of Mo-FEAs

N. Y. Lee, B. C. Kim, J. H. Jung, M. S. Kang, H. Kim, B. K. Ju, Y. H. Lee, M. H. Oh, J. Jang, S. Ahn

Department of Physics

Research output: Contribution to journal › Conference article › peer-review

2 Citations (Scopus)

Abstract

A 3.5-in. full-color field-emission display (FED) has been developed. The Spindt-tip array with a pixelated anode produces uniform and clean image. Changes in electron emission characteristics before and after the frit-sealing cycle were measured on the same field-emitter arrays (FEAs). Properties of thin Mo films after frit sealing in various gaseous ambients were estimated by AFM, AES, SIMS, and XPS. The possibility of applying Ar as an ambient gas during the frit-sealing cycle for vacuum packaging of field emission displays (FEDs) was reported. A set of uniquely printed spacers with high aspect ratios was fabricated on ITO-coated glass for high-vacuum packaging. The low-voltage phosphor was tested at an anode voltage of 300 V. Finally, full-color images of 64 gray scales will be demonstrated.

Original language	English
Pages (from-to)	245-248
Number of pages	4
Journal	Journal of the Society for Information Display
Volume	7
Issue number	4
DOIs	https://doi.org/10.1889/1.1985288
Publication status	Published - 1999
Event	The 1999 SID International Symposium - San Jose, CA, USA Duration: 1999 May 18 → 1999 May 20

ASJC Scopus subject areas

Electronic, Optical and Magnetic Materials
Atomic and Molecular Physics, and Optics
Electrical and Electronic Engineering

Access to Document

10.1889/1.1985288

Cite this

@article{4ad32cb2cc6e46bcb2c258c82e59f375,

title = "Influence of ambient gases during the frit-sealing cycle on the emission characteristics of Mo-FEAs",

abstract = "A 3.5-in. full-color field-emission display (FED) has been developed. The Spindt-tip array with a pixelated anode produces uniform and clean image. Changes in electron emission characteristics before and after the frit-sealing cycle were measured on the same field-emitter arrays (FEAs). Properties of thin Mo films after frit sealing in various gaseous ambients were estimated by AFM, AES, SIMS, and XPS. The possibility of applying Ar as an ambient gas during the frit-sealing cycle for vacuum packaging of field emission displays (FEDs) was reported. A set of uniquely printed spacers with high aspect ratios was fabricated on ITO-coated glass for high-vacuum packaging. The low-voltage phosphor was tested at an anode voltage of 300 V. Finally, full-color images of 64 gray scales will be demonstrated.",

author = "Lee, {N. Y.} and Kim, {B. C.} and Jung, {J. H.} and Kang, {M. S.} and H. Kim and Ju, {B. K.} and Lee, {Y. H.} and Oh, {M. H.} and J. Jang and S. Ahn",

year = "1999",

doi = "10.1889/1.1985288",

language = "English",

volume = "7",

pages = "245--248",

journal = "Journal of the Society for Information Display",

issn = "1071-0922",

publisher = "Society for Information Display",

number = "4",

note = "The 1999 SID International Symposium ; Conference date: 18-05-1999 Through 20-05-1999",

}

TY - JOUR

T1 - Influence of ambient gases during the frit-sealing cycle on the emission characteristics of Mo-FEAs

AU - Lee, N. Y.

AU - Kim, B. C.

AU - Jung, J. H.

AU - Kang, M. S.

AU - Kim, H.

AU - Ju, B. K.

AU - Lee, Y. H.

AU - Oh, M. H.

AU - Jang, J.

AU - Ahn, S.

PY - 1999

Y1 - 1999

N2 - A 3.5-in. full-color field-emission display (FED) has been developed. The Spindt-tip array with a pixelated anode produces uniform and clean image. Changes in electron emission characteristics before and after the frit-sealing cycle were measured on the same field-emitter arrays (FEAs). Properties of thin Mo films after frit sealing in various gaseous ambients were estimated by AFM, AES, SIMS, and XPS. The possibility of applying Ar as an ambient gas during the frit-sealing cycle for vacuum packaging of field emission displays (FEDs) was reported. A set of uniquely printed spacers with high aspect ratios was fabricated on ITO-coated glass for high-vacuum packaging. The low-voltage phosphor was tested at an anode voltage of 300 V. Finally, full-color images of 64 gray scales will be demonstrated.

AB - A 3.5-in. full-color field-emission display (FED) has been developed. The Spindt-tip array with a pixelated anode produces uniform and clean image. Changes in electron emission characteristics before and after the frit-sealing cycle were measured on the same field-emitter arrays (FEAs). Properties of thin Mo films after frit sealing in various gaseous ambients were estimated by AFM, AES, SIMS, and XPS. The possibility of applying Ar as an ambient gas during the frit-sealing cycle for vacuum packaging of field emission displays (FEDs) was reported. A set of uniquely printed spacers with high aspect ratios was fabricated on ITO-coated glass for high-vacuum packaging. The low-voltage phosphor was tested at an anode voltage of 300 V. Finally, full-color images of 64 gray scales will be demonstrated.

UR - http://www.scopus.com/inward/record.url?scp=6744243286&partnerID=8YFLogxK

U2 - 10.1889/1.1985288

DO - 10.1889/1.1985288

M3 - Conference article

AN - SCOPUS:6744243286

SN - 1071-0922

VL - 7

SP - 245

EP - 248

JO - Journal of the Society for Information Display

JF - Journal of the Society for Information Display

IS - 4

T2 - The 1999 SID International Symposium

Y2 - 18 May 1999 through 20 May 1999

ER -

Influence of ambient gases during the frit-sealing cycle on the emission characteristics of Mo-FEAs

Abstract

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this