Onset condition of pulsating cone-jet mode of electrohydrodynamic jetting for plane, hole, and pin type electrodes

Hyojun Kim; Junyoung Song; Jaewon Chung; Daehie Hong

doi:10.1063/1.3511685

Onset condition of pulsating cone-jet mode of electrohydrodynamic jetting for plane, hole, and pin type electrodes

Hyojun Kim, Junyoung Song, Jaewon Chung, Daehie Hong

School of Mechanical Engineering

Research output: Contribution to journal › Article › peer-review

28 Citations (Scopus)

Abstract

In this work, electrohydrodynamic (EHD) jetting phenomena were observed for three different types of bottom electrode (plane, hole, pin) at constant back pressure condition of the reservoir. Especially, we have focused on the measurement and numerical prediction of the onset voltage for pulsating Taylor cone jetting, changing glass capillary nozzle diameter (outer diameter: 16-47 μm), hydrostatic back pressure head in the reservoir, and the distance between the nozzle and the bottom electrode to provide design information on the EHD multinozzle head.

Original language	English
Article number	102804
Journal	Journal of Applied Physics
Volume	108
Issue number	10
DOIs	https://doi.org/10.1063/1.3511685
Publication status	Published - 2010 Nov 15

ASJC Scopus subject areas

Physics and Astronomy(all)

Access to Document

10.1063/1.3511685

Cite this

@article{e3bec02ff10947f9af4978da99b3664e,

title = "Onset condition of pulsating cone-jet mode of electrohydrodynamic jetting for plane, hole, and pin type electrodes",

abstract = "In this work, electrohydrodynamic (EHD) jetting phenomena were observed for three different types of bottom electrode (plane, hole, pin) at constant back pressure condition of the reservoir. Especially, we have focused on the measurement and numerical prediction of the onset voltage for pulsating Taylor cone jetting, changing glass capillary nozzle diameter (outer diameter: 16-47 μm), hydrostatic back pressure head in the reservoir, and the distance between the nozzle and the bottom electrode to provide design information on the EHD multinozzle head.",

author = "Hyojun Kim and Junyoung Song and Jaewon Chung and Daehie Hong",

note = "Funding Information: This research was supported by Basic Science Research Program through the National Research Foundation of Korea (NRF) funded by the Ministry of Education, Science, and Technology (Grant Nos. 2009-0077558 and 2009-0063175) and by the Korea University Grant.",

year = "2010",

month = nov,

day = "15",

doi = "10.1063/1.3511685",

language = "English",

volume = "108",

journal = "Journal of Applied Physics",

issn = "0021-8979",

publisher = "American Institute of Physics Publising LLC",

number = "10",

}

TY - JOUR

T1 - Onset condition of pulsating cone-jet mode of electrohydrodynamic jetting for plane, hole, and pin type electrodes

AU - Kim, Hyojun

AU - Song, Junyoung

AU - Chung, Jaewon

AU - Hong, Daehie

N1 - Funding Information: This research was supported by Basic Science Research Program through the National Research Foundation of Korea (NRF) funded by the Ministry of Education, Science, and Technology (Grant Nos. 2009-0077558 and 2009-0063175) and by the Korea University Grant.

PY - 2010/11/15

Y1 - 2010/11/15

N2 - In this work, electrohydrodynamic (EHD) jetting phenomena were observed for three different types of bottom electrode (plane, hole, pin) at constant back pressure condition of the reservoir. Especially, we have focused on the measurement and numerical prediction of the onset voltage for pulsating Taylor cone jetting, changing glass capillary nozzle diameter (outer diameter: 16-47 μm), hydrostatic back pressure head in the reservoir, and the distance between the nozzle and the bottom electrode to provide design information on the EHD multinozzle head.

AB - In this work, electrohydrodynamic (EHD) jetting phenomena were observed for three different types of bottom electrode (plane, hole, pin) at constant back pressure condition of the reservoir. Especially, we have focused on the measurement and numerical prediction of the onset voltage for pulsating Taylor cone jetting, changing glass capillary nozzle diameter (outer diameter: 16-47 μm), hydrostatic back pressure head in the reservoir, and the distance between the nozzle and the bottom electrode to provide design information on the EHD multinozzle head.

UR - http://www.scopus.com/inward/record.url?scp=78650270038&partnerID=8YFLogxK

U2 - 10.1063/1.3511685

DO - 10.1063/1.3511685

M3 - Article

AN - SCOPUS:78650270038

SN - 0021-8979

VL - 108

JO - Journal of Applied Physics

JF - Journal of Applied Physics

IS - 10

M1 - 102804

ER -

Onset condition of pulsating cone-jet mode of electrohydrodynamic jetting for plane, hole, and pin type electrodes

Abstract

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this