Performance of an anode-supported solid oxide fuel cell in a mixed-gas configuration

Xuan Phuong Vo Nguyen, Woo Nam Suk, Pil Yoon Sung, Jonghee Han, Tae Hoon Lim, Seong Ahn Hong

Research output: Contribution to journalArticlepeer-review


Thin films of Samaria-Doped Ceria (SDC) were formed on porous substrates using screen printing and within the pores of electrodes using a sol-gel coating method. The SDC-electrolyte film, with a controllable thickness of less than 20 μ, was bound tightly to the anode substrate. The maximum power density of the single cells was 375 mW cm-2 at 650°C with a 25% methane in mixed gas mixture. The long-term stability of the cell as well as the effects of flow rate, gas composition, fuel type, etc. on the cell performance will be continuously studied to get the optimization of operating conditions.

Original languageEnglish
Pages (from-to)597-600
Number of pages4
JournalStudies in Surface Science and Catalysis
Publication statusPublished - 2006

Bibliographical note

Funding Information:
This work was financially supported by Korea Institute of Science and Technology.

ASJC Scopus subject areas

  • Catalysis
  • Condensed Matter Physics
  • Physical and Theoretical Chemistry
  • Surfaces, Coatings and Films
  • Materials Chemistry


Dive into the research topics of 'Performance of an anode-supported solid oxide fuel cell in a mixed-gas configuration'. Together they form a unique fingerprint.

Cite this