Properties of La0.8Sr0.2Ga0.8Mg 0.2O2.8 electrolyte formed from the nano-sized powders prepared by spray pyrolysis

Jung Hyun Kim; Dae Soo Jung; You Na Ko; Young Jun Hong; Hye Young Koo; Yun Chan Kang; Jong Heun Lee

doi:10.2109/jcersj2.119.752

Properties of La_0.8Sr_0.2Ga_0.8Mg _0.2O_2.8 electrolyte formed from the nano-sized powders prepared by spray pyrolysis

Jung Hyun Kim, Dae Soo Jung, You Na Ko, Young Jun Hong, Hye Young Koo, Yun Chan Kang, Jong Heun Lee

Research output: Contribution to journal › Article › peer-review

Abstract

The La_0.8Sr_0.2Ga_0.8Mg_0.2O _2.8 (LSGM) precursor powders with large size, hollow and thin wall structure are prepared by spray pyrolysis from the spray solution with ethylenediaminetetraacetic acid (EDTA). The precursor powders turned into the nanosized powders after post-treatment and grinding processes. The pellets formed from the powders obtained from the spray solution with EDTA had pure LSGM phase, clean surface and dense structure with small pores after sintering at 1300°C. On the other hand, the LSGM pellet formed from the powders obtained from the spray solution without EDTA had small impurity phase, porous structure and rough surface. The conductivity of the LSGM electrolyte was 0.006 S/cm at a measurement temperature of 600°C.

Original language	English
Pages (from-to)	752-756
Number of pages	5
Journal	Journal of the Ceramic Society of Japan
Volume	119
Issue number	1394
DOIs	https://doi.org/10.2109/jcersj2.119.752
Publication status	Published - 2011 Oct

Keywords

Chemical Synthesis
Electrolyte
Nano powders
Spray pyroltsis

ASJC Scopus subject areas

Ceramics and Composites
Chemistry(all)
Condensed Matter Physics
Materials Chemistry

Access to Document

10.2109/jcersj2.119.752

Cite this

@article{3037f23ddffe45448a5ae19512ca48c4,

title = "Properties of La0.8Sr0.2Ga0.8Mg 0.2O2.8 electrolyte formed from the nano-sized powders prepared by spray pyrolysis",

abstract = "The La0.8Sr0.2Ga0.8Mg0.2O 2.8 (LSGM) precursor powders with large size, hollow and thin wall structure are prepared by spray pyrolysis from the spray solution with ethylenediaminetetraacetic acid (EDTA). The precursor powders turned into the nanosized powders after post-treatment and grinding processes. The pellets formed from the powders obtained from the spray solution with EDTA had pure LSGM phase, clean surface and dense structure with small pores after sintering at 1300°C. On the other hand, the LSGM pellet formed from the powders obtained from the spray solution without EDTA had small impurity phase, porous structure and rough surface. The conductivity of the LSGM electrolyte was 0.006 S/cm at a measurement temperature of 600°C.",

keywords = "Chemical Synthesis, Electrolyte, Nano powders, Spray pyroltsis",

author = "Kim, {Jung Hyun} and Jung, {Dae Soo} and Ko, {You Na} and Hong, {Young Jun} and Koo, {Hye Young} and Kang, {Yun Chan} and Lee, {Jong Heun}",

year = "2011",

month = oct,

doi = "10.2109/jcersj2.119.752",

language = "English",

volume = "119",

pages = "752--756",

journal = "Nippon Seramikkusu Kyokai Gakujutsu Ronbunshi/Journal of the Ceramic Society of Japan",

issn = "1882-0743",

publisher = "Ceramic Society of Japan/Nippon Seramikkusu Kyokai",

number = "1394",

}

TY - JOUR

T1 - Properties of La0.8Sr0.2Ga0.8Mg 0.2O2.8 electrolyte formed from the nano-sized powders prepared by spray pyrolysis

AU - Kim, Jung Hyun

AU - Jung, Dae Soo

AU - Ko, You Na

AU - Hong, Young Jun

AU - Koo, Hye Young

AU - Kang, Yun Chan

AU - Lee, Jong Heun

PY - 2011/10

Y1 - 2011/10

N2 - The La0.8Sr0.2Ga0.8Mg0.2O 2.8 (LSGM) precursor powders with large size, hollow and thin wall structure are prepared by spray pyrolysis from the spray solution with ethylenediaminetetraacetic acid (EDTA). The precursor powders turned into the nanosized powders after post-treatment and grinding processes. The pellets formed from the powders obtained from the spray solution with EDTA had pure LSGM phase, clean surface and dense structure with small pores after sintering at 1300°C. On the other hand, the LSGM pellet formed from the powders obtained from the spray solution without EDTA had small impurity phase, porous structure and rough surface. The conductivity of the LSGM electrolyte was 0.006 S/cm at a measurement temperature of 600°C.

AB - The La0.8Sr0.2Ga0.8Mg0.2O 2.8 (LSGM) precursor powders with large size, hollow and thin wall structure are prepared by spray pyrolysis from the spray solution with ethylenediaminetetraacetic acid (EDTA). The precursor powders turned into the nanosized powders after post-treatment and grinding processes. The pellets formed from the powders obtained from the spray solution with EDTA had pure LSGM phase, clean surface and dense structure with small pores after sintering at 1300°C. On the other hand, the LSGM pellet formed from the powders obtained from the spray solution without EDTA had small impurity phase, porous structure and rough surface. The conductivity of the LSGM electrolyte was 0.006 S/cm at a measurement temperature of 600°C.

KW - Chemical Synthesis

KW - Electrolyte

KW - Nano powders

KW - Spray pyroltsis

UR - http://www.scopus.com/inward/record.url?scp=80053608715&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=80053608715&partnerID=8YFLogxK

U2 - 10.2109/jcersj2.119.752

DO - 10.2109/jcersj2.119.752

M3 - Article

AN - SCOPUS:80053608715

SN - 1882-0743

VL - 119

SP - 752

EP - 756

JO - Nippon Seramikkusu Kyokai Gakujutsu Ronbunshi/Journal of the Ceramic Society of Japan

JF - Nippon Seramikkusu Kyokai Gakujutsu Ronbunshi/Journal of the Ceramic Society of Japan

IS - 1394

ER -