Recording at 300 KFCI with perpendicular co-alloy multilayers

Kuoksan Ho Bruce; M. Lairson; Young K. Kiin; George I. Noyes

doi:10.1109/20.706725

Recording at 300 KFCI with perpendicular co-alloy multilayers

Kuoksan Ho Bruce, M. Lairson, Young K. Kiin, George I. Noyes

Research output: Contribution to journal › Article › peer-review

25 Citations (Scopus)

Abstract

Using a merged MR head with novel C0B/Pt multilayers, various magnetic and recording properties were measured and compared with a commercial longitudinal media disk. At high frequency, about 3 dB of integrated SNR improvement was found compared with the longitudinal disk. Recording non-linearities, such as non-linear transition shift and partial erasure were also found to be smaller. Using various PRML channels, error rates below 1×10⁷ was achieved at low linear densities. The error rate began to degrade at 300 kfcl. Using au EFR4 channel, a raw error rate of 4×10^-4 was obtained at 350 kbpi with a data rate of 60 Mbits/sec.

Original language	English
Pages (from-to)	1854-1856
Number of pages	3
Journal	IEEE Transactions on Magnetics
Volume	34
Issue number	4 PART 1
DOIs	https://doi.org/10.1109/20.706725
Publication status	Published - 1998
Externally published	Yes

Bibliographical note

Funding Information:
Manuscript received October 15, 1997 Kuoltsan Ho, Tel 713-527-8750 Ex 3584, Fax 713-285-5423, ltiioltsan~ricee du This work was supported in pait by a graiit from National Science Foundation, LCS-9408882

ASJC Scopus subject areas

Electronic, Optical and Magnetic Materials
Electrical and Electronic Engineering

Access to Document

10.1109/20.706725

Cite this

@article{907e39cef19b4f429aad20faa00ba526,

title = "Recording at 300 KFCI with perpendicular co-alloy multilayers",

abstract = "Using a merged MR head with novel C0B/Pt multilayers, various magnetic and recording properties were measured and compared with a commercial longitudinal media disk. At high frequency, about 3 dB of integrated SNR improvement was found compared with the longitudinal disk. Recording non-linearities, such as non-linear transition shift and partial erasure were also found to be smaller. Using various PRML channels, error rates below 1×107 was achieved at low linear densities. The error rate began to degrade at 300 kfcl. Using au EFR4 channel, a raw error rate of 4×10-4 was obtained at 350 kbpi with a data rate of 60 Mbits/sec.",

author = "Bruce, {Kuoksan Ho} and M. Lairson and Kiin, {Young K.} and Noyes, {George I.}",

note = "Funding Information: Manuscript received October 15, 1997 Kuoltsan Ho, Tel 713-527-8750 Ex 3584, Fax 713-285-5423, ltiioltsan~ricee du This work was supported in pait by a graiit from National Science Foundation, LCS-9408882",

year = "1998",

doi = "10.1109/20.706725",

language = "English",

volume = "34",

pages = "1854--1856",

journal = "IEEE Transactions on Magnetics",

issn = "0018-9464",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

number = "4 PART 1",

}

TY - JOUR

T1 - Recording at 300 KFCI with perpendicular co-alloy multilayers

AU - Bruce, Kuoksan Ho

AU - Lairson, M.

AU - Kiin, Young K.

AU - Noyes, George I.

N1 - Funding Information: Manuscript received October 15, 1997 Kuoltsan Ho, Tel 713-527-8750 Ex 3584, Fax 713-285-5423, ltiioltsan~ricee du This work was supported in pait by a graiit from National Science Foundation, LCS-9408882

PY - 1998

Y1 - 1998

N2 - Using a merged MR head with novel C0B/Pt multilayers, various magnetic and recording properties were measured and compared with a commercial longitudinal media disk. At high frequency, about 3 dB of integrated SNR improvement was found compared with the longitudinal disk. Recording non-linearities, such as non-linear transition shift and partial erasure were also found to be smaller. Using various PRML channels, error rates below 1×107 was achieved at low linear densities. The error rate began to degrade at 300 kfcl. Using au EFR4 channel, a raw error rate of 4×10-4 was obtained at 350 kbpi with a data rate of 60 Mbits/sec.

AB - Using a merged MR head with novel C0B/Pt multilayers, various magnetic and recording properties were measured and compared with a commercial longitudinal media disk. At high frequency, about 3 dB of integrated SNR improvement was found compared with the longitudinal disk. Recording non-linearities, such as non-linear transition shift and partial erasure were also found to be smaller. Using various PRML channels, error rates below 1×107 was achieved at low linear densities. The error rate began to degrade at 300 kfcl. Using au EFR4 channel, a raw error rate of 4×10-4 was obtained at 350 kbpi with a data rate of 60 Mbits/sec.

UR - http://www.scopus.com/inward/record.url?scp=0032115720&partnerID=8YFLogxK

U2 - 10.1109/20.706725

DO - 10.1109/20.706725

M3 - Article

AN - SCOPUS:0032115720

SN - 0018-9464

VL - 34

SP - 1854

EP - 1856

JO - IEEE Transactions on Magnetics

JF - IEEE Transactions on Magnetics

IS - 4 PART 1

ER -

Recording at 300 KFCI with perpendicular co-alloy multilayers

Abstract

Bibliographical note

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this