Separation of lithium isotopes by N4S2 azacrown ion exchanger

D. W. Kim; C. S. Kim; J. S. Jeon; J. S. Kim; N. S. Lee

doi:10.1007/BF02347479

Separation of lithium isotopes by N₄S₂ azacrown ion exchanger

D. W. Kim^*
, C. S. Kim
, J. S. Jeon
, J. S. Kim
, N. S. Lee

^*Corresponding author for this work

Research output: Contribution to journal › Article › peer-review

6 Citations (Scopus)

Abstract

The novel N₄S₂ azacrown ion exchange resin was prepared. The ion exchange capacity of N₄S₂ ion exchanger was 0.34 meq/g dry resin. A study on the separation of lithium isotopes was carried out with N₄S₂ azacrown ion exchange resin. The lighter isotope, ⁶Li is concentrated in the resin phase, while the heavier isotope, ⁷Li is enriched in the solution phase. With column chromatography [0.1 cm (I.D.)x32 cm (height)] using 2.0M NH₄Cl as an eluent, separation factor, a = 1.034 was obtained.

Original language	English
Pages (from-to)	379-382
Number of pages	4
Journal	Journal of Radioanalytical and Nuclear Chemistry
Volume	241
Issue number	2
DOIs	https://doi.org/10.1007/BF02347479
Publication status	Published - 1999
Externally published	Yes

Bibliographical note

Funding Information:
This work was supported by the Basic Science Research Institute Program, Ministry of Education, Korea, 1997, Project No. BSRI-97-3435.

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 3 Good Health and Well-being

ASJC Scopus subject areas

Analytical Chemistry
Nuclear Energy and Engineering
Radiology Nuclear Medicine and imaging
Pollution
Spectroscopy
Public Health, Environmental and Occupational Health
Health, Toxicology and Mutagenesis

Access to Document

10.1007/BF02347479

Cite this

@article{736c74e7103a4bc79135d08882a6b3a0,

title = "Separation of lithium isotopes by N4S2 azacrown ion exchanger",

abstract = "The novel N4S2 azacrown ion exchange resin was prepared. The ion exchange capacity of N4S2 ion exchanger was 0.34 meq/g dry resin. A study on the separation of lithium isotopes was carried out with N4S2 azacrown ion exchange resin. The lighter isotope, 6Li is concentrated in the resin phase, while the heavier isotope, 7Li is enriched in the solution phase. With column chromatography [0.1 cm (I.D.)x32 cm (height)] using 2.0M NH4Cl as an eluent, separation factor, a = 1.034 was obtained.",

author = "Kim, \{D. W.\} and Kim, \{C. S.\} and Jeon, \{J. S.\} and Kim, \{J. S.\} and Lee, \{N. S.\}",

note = "Funding Information: This work was supported by the Basic Science Research Institute Program, Ministry of Education, Korea, 1997, Project No. BSRI-97-3435.",

year = "1999",

doi = "10.1007/BF02347479",

language = "English",

volume = "241",

pages = "379--382",

journal = "Journal of Radioanalytical and Nuclear Chemistry",

issn = "0236-5731",

publisher = "Springer Nature",

number = "2",

}

TY - JOUR

T1 - Separation of lithium isotopes by N4S2 azacrown ion exchanger

AU - Kim, D. W.

AU - Kim, C. S.

AU - Jeon, J. S.

AU - Kim, J. S.

AU - Lee, N. S.

N1 - Funding Information: This work was supported by the Basic Science Research Institute Program, Ministry of Education, Korea, 1997, Project No. BSRI-97-3435.

PY - 1999

Y1 - 1999

N2 - The novel N4S2 azacrown ion exchange resin was prepared. The ion exchange capacity of N4S2 ion exchanger was 0.34 meq/g dry resin. A study on the separation of lithium isotopes was carried out with N4S2 azacrown ion exchange resin. The lighter isotope, 6Li is concentrated in the resin phase, while the heavier isotope, 7Li is enriched in the solution phase. With column chromatography [0.1 cm (I.D.)x32 cm (height)] using 2.0M NH4Cl as an eluent, separation factor, a = 1.034 was obtained.

AB - The novel N4S2 azacrown ion exchange resin was prepared. The ion exchange capacity of N4S2 ion exchanger was 0.34 meq/g dry resin. A study on the separation of lithium isotopes was carried out with N4S2 azacrown ion exchange resin. The lighter isotope, 6Li is concentrated in the resin phase, while the heavier isotope, 7Li is enriched in the solution phase. With column chromatography [0.1 cm (I.D.)x32 cm (height)] using 2.0M NH4Cl as an eluent, separation factor, a = 1.034 was obtained.

UR - https://www.scopus.com/pages/publications/0032792522

U2 - 10.1007/BF02347479

DO - 10.1007/BF02347479

M3 - Article

AN - SCOPUS:0032792522

SN - 0236-5731

VL - 241

SP - 379

EP - 382

JO - Journal of Radioanalytical and Nuclear Chemistry

JF - Journal of Radioanalytical and Nuclear Chemistry

IS - 2

ER -