Abstract
This paper presents a study on the tubeless Plasma Display Panel (PDP) packaging using glass-to-glass electrostatic bonding with intermediate amorphous silicon. The bonded sample sealing the mixed gas with three species showed high strength ranging from 2.5 MPa to 4 MPa. The glass-to-glass bonding for packaging was performed at a low temperature of 180 °C by applying bias of 250 V in ambient of mixed gases of He-Ne(27 %)-Xe(3 %). The tubeless packaging was accomplished by bonding the support glass plate of 30 mm×50 mm on the rear glass panel and the capping glass of 20 mm×20 mm. The 4-inch color AC-PDP with thickness of 8 mm was successfully fabricated and fully emitted as white color at a firing voltage of 190V.
Original language | English |
---|---|
Pages (from-to) | 11-16 |
Number of pages | 6 |
Journal | Journal of Information Display |
Volume | 3 |
Issue number | 1 |
DOIs | |
Publication status | Published - 2002 |
Externally published | Yes |
Keywords
- Electrostatic bonding
- Hermetic seal
- Light emission
- PDP
- Tubeless packaging
ASJC Scopus subject areas
- General Materials Science
- Electrical and Electronic Engineering