Unveiling the roles of initial phase constituents and phase metastability in hydrogen embrittlement of TRIP‐assisted VCrCoFeNi medium‐entropy alloys

Sang Yoon Song, Dae Cheol Yang, Han Jin Kim, Sang In Lee, Hyeon Seok Do, Byeong Joo Lee, Alireza Zargaran, Seok Su Sohn*

*Corresponding author for this work

    Research output: Contribution to journalArticlepeer-review

    7 Citations (Scopus)

    Abstract

    Medium-entropy alloys (MEAs) that exhibit transformation-induced plasticity (TRIP) from face-centered cubic (FCC) to body-centered cubic (BCC) are considered promising for liquid hydrogen environments due to their remarkable cryogenic strength. Nonetheless, studies on hydrogen embrittlement (HE) in BCC-TRIP MEAs have not been conducted, although the TRIP effect and consequent BCC martensite usually deteriorate HE susceptibility. In these alloys, initial as-quenched martensite alters hydrogen diffusion and trap behavior, and deformation-induced martensitic transformation (DIMT) provides preferred crack propagation sites, which critically affects HE susceptibility. Therefore, this study aims to investigate the HE behavior of BCC-TRIP MEAs by designing four V10Cr10Co30Fe50–xNix (x = 0, 1, 2, and 3 at%) MEAs, adjusting both the initial phase constituent and phase metastability. A decreased Ni content leads to a reduced fraction and mechanical stability of FCC, which in turn increases HE susceptibility, as determined through electrochemical hydrogen pre-charging and slow-strain rate tests The permeation test and thermal desorption analysis reveal that the hydrogen diffusivity and content are affected by initial BCC fraction, interconnectivity of BCC, and refined FCC. As these initial phase constituents differ between the alloys with FCC- and BCC- dominant initial phase, microstructural factors affecting HE are unveiled discretely among these alloy groups by correlation of hydrogen-induced crack behavior with hydrogen diffusion and trap behavior. In alloys with an FCC-dominant initial phase, the initial BCC fraction and DIMT initiation rate emerge as critical factors, rather than the extent of DIMT. For BCC-dominant alloys, the primary contributor is an increase in the initial BCC fraction, rather than the extent or rate of DIMT. The unraveled roles of microstructural factors provide insights into designing HE-resistant BCC-TRIP MEAs.

    Original languageEnglish
    Pages (from-to)160-176
    Number of pages17
    JournalJournal of Materials Science and Technology
    Volume207
    DOIs
    Publication statusPublished - 2025 Feb 1

    Bibliographical note

    Publisher Copyright:
    © 2024

    Keywords

    • Hydrogen diffusion and trapping
    • Hydrogen embrittlement
    • Hydrogen-induced crack
    • Medium-entropy alloys (MEAs)
    • Transformation-induced plasticity (TRIP)

    ASJC Scopus subject areas

    • Ceramics and Composites
    • Mechanics of Materials
    • Mechanical Engineering
    • Polymers and Plastics
    • Metals and Alloys
    • Materials Chemistry

    Fingerprint

    Dive into the research topics of 'Unveiling the roles of initial phase constituents and phase metastability in hydrogen embrittlement of TRIP‐assisted VCrCoFeNi medium‐entropy alloys'. Together they form a unique fingerprint.

    Cite this